Shimmering sound effects

Shimmering sound effects DEFAULT

Shimmering Shards - Broken Glass Library

Note: If you click Purchase, it will take you to asoundeffect.com where you can actually purchase the library.

Enrich your sonic palette with shimmering shards and the visceral sound of glass breaking, recorded at 96kHz/24bit! The Shimmering Shards: Broken Glass library contains 217 carefully selected sound effects, ready to be dropped into your project!

The vividly descriptive and meticulously chosen SoundMiner metadata that has been embedded into each of the 217 files allows you to save minutes, even hours, of painful searching through libraries, trying to find that elusive sound! Now it is easier than ever, due to metadata that has been crafted with humans, and not search engines, in mind!

The main library consists of: rummaging through broken glass with a metallic object, smashing broken shards of glass, breaking different size windows and pieces of glass, and hitting thick glass at different intensities without breaking it.

The bonus library contains 21 different variations of a glass bottle breaking on rocks and two variations of a bottle bouncing off the rocks without breaking. The length of all the files ranges between 1 and 3 seconds long.

This library was recorded outside on a very quiet day, with no wind, insects, birds or traffic. iZotope RX was then used to eliminate the small amounts of background noise that was present. As a result, all the recordings are dry, clean and have no reverb.

This library is useful for, but not limited to: Feature Films, TV Series, Short Films, YouTube Videos, Games, and more!

Sours: https://www.skyesaudio.com/shimmering-shards-broken-glass-sound-effects-library

shimmering crystal 4 sound effect

More Similar Sounds: 

  • production elements, shimmering, crystal, shimmer, shine, shiny, glisten, sparkle, airy, machine, sci-fi, sci, fi, production, element, sound, design, loop, looping, pad, texture, drone, droning, ambient, ambience, snowflake

Sound Details: 

Sound Nameshimmering crystal 4 sound effect
Bit Rate80000
Play Time00:00:15
File Size150976
Sample Rate32000
Channels2

keywords: 

production elements sound effect
shimmering sound effect
crystal sound effect
shimmer sound effect
shine sound effect
shiny sound effect
glisten sound effect
sparkle sound effect
airy sound effect
machine sound effect
sci-fi sound effect
sci sound effect
fi sound effect
production sound effect
element sound effect
sound sound effect
design sound effect
loop sound effect
looping sound effect
pad sound effect
texture sound effect
drone sound effect
droning sound effect
ambient sound effect
ambience sound effect
snowflake sound effect

More Similar Sound Effects

More Similar Sounds: 

  • production elements, shimmering, crystal, shimmer, shine, shiny, glisten, sparkle, airy, machine, sci-fi, sci, fi, production, element, sound, design, loop, looping, pad, texture, drone, droning, ambient, ambience, labradorite, starry-eyed, area

More Similar Sounds: 

  • production elements, shimmering, crystal, shimmer, shine, shiny, glisten, sparkle, airy, machine, sci-fi, sci, fi, production, element, sound, design, loop, looping, pad, texture, drone, droning, ambient, ambience

More Similar Sounds: 

  • production elements, shimmering, crystal, shimmer, shine, shiny, glisten, sparkle, airy, machine, sci-fi, sci, fi, production, element, sound, design, loop, looping, pad, texture, drone, droning, ambient, ambience

More Similar Sounds: 

  • production elements, crystal, shining, shiny, shimmering, airy, air, sci-fi, sci, fi, chord, effect, efx, production, element, sound, design, bright

More Similar Sounds: 

  • production elements, crystal, shining, shiny, shimmering, airy, air, sci-fi, sci, fi, chord, effect, efx, production, element, sound, design, bright
Sours: http://freesoundeffect.net/sound/shimmering-crystal-4-sound-effect
  1. Oklahoma unemployment pay chart
  2. Shampoo bowl for bedridden patients
  3. Sky light wallpaper
  4. 5 shelf white bookcase
  5. Nokia he

Creating Shimmer Reverb Effects

Creating your own shimmer reverb effects is easy, and gives you plenty of creative control.

One of the staples of ambient music is the so-called shimmer reverb effect, in which each note is followed by a reverberant wash of sound an octave higher than the original. Guitar players often combine this effect with a slow fade-in to the note, which can be achieved using a volume pedal, a little finger wrapped around the guitar's volume knob, or a dedicated slow-attack pedal, such as the EHX Attack Decay that we reviewed in SOS July 2019 (https://sosm.ag/ehx-attack-decay). Numerous reverb pedals now include a shimmer effect, but those that do it well don't come cheap. An inexpensive software option is the excellent Valhalla Shimmer plug‑in. But you can also set up your own variation on the shimmer effect using plug‑ins that most of us already have.

Shimmer Basics

Taking the basic shimmer effect first, this is best set up as a send effect, as this allows you to use different processing to the dry part of the sound, such as a more conventional reverb and/or delay. Some shimmer pedal designs also incorporate a little feedback from the output of the reverb back to the input, and this configuration makes replicating that trickier in most DAWs, but I've found that this step is usually unnecessary anyway.

The two key components of the shimmer effect are octave-up pitch shifting and a suitably long and washy reverb. But it's also helpful to place a compressor before the pitch-shifter — this can help to keep up the level and density of the reverb tail, creating something akin to a pad or string machine sound. To reinforce the pseudo-strings effect, try adding modulation to the shimmer sound using a subtle chorus or ensemble plug‑in. Using a rotary speaker emulation, on the other hand, will give you something more akin to (surprise, surprise!) an organ sound.

Package iconshimmerreverbeffectslogictemplates.zip

As a Logic Pro user, I have my own template for the shimmer effect that uses only Logic's built-in plug‑ins, and you can download a Zip file of that above. But I realise that many of you use other DAWs, so in this article I'll try to suggest third-party plug‑ins that will work well. The best place to start, of course, is with the plug‑ins you already have — not least your own DAW's bundled collection.

Treating The 'Dry' Path

By way of insert effects on the main source track, I like to add a little reverb plus some quarter-note tape-style delay, with the top rolled off down to maybe 1.2kHz to make the repeats sit nicely behind the main sound. (Without such delay and/or reverb effects, I find the dry part of the sound can seem rather too separate from the shimmer reverb tail.) Pretty much any basic reverb and a delay plug‑in that also includes variable filters will work for this part of the job.

The effects used by Paul for the DIY shimmer effect he describes in the main text.The effects used by Paul for the DIY shimmer effect he describes in the main text.If you're working with a clean, DI'd electric guitar, try putting a compressor at the start of the track's plug‑in chain — this will help even things up, and if the note attack is too 'pingy', reduce the compressor attack time until it is suitably tamed. Add just enough gain reduction (typically 6dB or thereabouts) to soften the note. Either use an auto release or set it to around 200ms for slowly played parts. There's also the option of panning this 'dry' track to one side and the shimmer send bus to the other, which can create a bigger stereo panorama, which is sometimes what you want, and sometimes not.

The Long Wash

For the shimmer chain — which, as I said in passing, should be set up as a send effect — you can again start with pretty much any compressor. Of course, the aux send control of your source track controls the level feeding into the compressor, and thus how much signal crosses the compressor threshold, so it's usually best to leave the send at its unity gain position and adjust the amount of added shimmer using the aux bus (effects return) track's level fader. The compressor type and settings aren't critical, but I tend to use a ratio of around 4:1, a fast attack and a release time of about 200 to 400 ms. The threshold is then adjusted to give gain reduction up to about 10dB.

Next up is a pitch-shifter. Most DAWs have one now, but if you don't already have something suitable, the free Pitchproof from https://aegeanmusic.com will do the job nicely. This particular pitch-shifter has the added benefit that it can generate key-related harmonies from a monophonic input, which opens up further possibilities such as having the shimmer tail work as a harmony to the original sound. For the conventional shimmer effect, however, set it to +12 semitones. I also like to run the mix control at between 50- and 70-percent wet, so that some of the original pitch also gets through to the reverb, which comes next. As a rule, the better the quality of the pitch-shifter you use, the smoother the sound. But as the reverb that follows does a lot to hide any rough edges, the pitch-shifting quality doesn't need to be top-notch!

I find an algorithmic reverb set to Hall or 'large' usually gives the best results, and they don't need to be expensive or sophisticated.

I've achieved good sounds with many different reverbs — there are countless options to choose from — but I find an algorithmic reverb set to Hall or 'large' usually gives the best results, and they don't need to be expensive or sophisticated. For this example, I've settled on the Initial Audio AR1, which is very straightforward and usually available at a very substantial discount. Again, you probably already have something that you can try.

The key settings are a long reverb time, little or no HF damping, and a 100-percent wet mix. If your reverb has a top-cut filter, as the AR1 one does, then bring it down until the reverb sounds adequately smooth. If your reverb has modulation, try introducing some of that too, to add more texture to your shimmer effect. When working in Logic Pro, I generally use the old Silververb plug‑in — one of Logic's original 'low horsepower' plug‑ins, it somehow captures that '80s digital reverb sound perfectly.

Another option at this point is to add some soft tape delay to the shimmer effect, but I'll leave that up to you. Finally, we can add a modulation plug‑in, to lend further texture to the shimmer. As an alternative to straight chorus, you could try a Roland Dimension D emulation, or one of those ensemble effects that does a similar thing. I often use Logic's own Ensemble plug‑in, but any multi-voice chorus-type effect will produce broadly similar results if used subtly.

Go Slow

One of the presets of Eventide's Physion will deliver the sort of slow-attack effect that's often used by guitarists along with shimmer reverb.One of the presets of Eventide's Physion will deliver the sort of slow-attack effect that's often used by guitarists along with shimmer reverb.Now for the slow attack. If you're playing your part in live, while monitoring the shimmer effect, you can use your guitar's volume control or a pedal as outlined earlier — many ambient musicians do just that. Alternatively, a gate plug‑in that can be set to a fairly long attack time can be used to coax some passable slow attack sounds, simply by setting the attack to its maximum time (you can do this during the performance, or later). But the plug‑in I've found that works like magic in creating a slow-attack bowed guitar is Eventide's Physion. Set it to the Bowed Guitar preset, adjust the Trans Decay knob to get the speed of attack you require and it's job done!

Finally, the shimmer effect also works really well in turning an eBow part into a rich pad — again, a common ambient music technique. To ring the changes you can also try adding a sub-octave as well as an octave up; you just need a pitch–shifter that can generate two voices with different shifts. In fact, the more you play with this intriguing effect, the more you'll find ways of adding your own twists to it. Things to try right away include putting heavy flanging before the reverb in the shimmer path or using a sync'ed chopper plug‑in to turn the shimmer tails into rhythmic elements. If you have a granular processor, try that on the shimmer bus too as the end result often sounds much greater than the sum of its parts.

Most importantly, remember that this isn't just an effect for guitarists. It can work really well on vocals and piano-style sounds too, but you can try it with any source, whether 'playing' the effect during a performance, or adding some atmosphere and mystery after the fact. Have fun experimenting — I know I have!

Buy PDF version

Sours: https://www.soundonsound.com/techniques/creating-shimmer-reverb-effects
15 MAGIC SOUND EFFECTS - NON-COPYRIGHTED

Magic Sound Effects

You are allowed to use the sounds on our website free of charge and royalty free in your projects but you are NOT allowed to post the sounds on any web site for others to download, link directly to individual audio files, or sell the sounds to anyone else. Remember to read Terms of Use before downloading and using the sound effects or music tracks.

misc sounds

Title: Magic Chime 01

Magical chime sound effect
Keywords: bell, bells, magic wand, fairy dust, transition, audio, clip, windchime, chime, chiming, sound bite

0:03
48 kHz
24 bit
Stereo

 
 
misc sounds

Title: Magic Chime 02

Magical chime sound effect
Keywords:

0:02
48 kHz
24 bit
Stereo

 
misc sounds

Title: Magic Chime 03

Magical chime sound effect
Keywords: bell, gliss, shimmer, shimmering, shine, shining, sparkle, sparkling, glitter, glittering

0:05
48 kHz
24 bit
Stereo

 
misc sounds

Title: Magic Chime 04

Magical chime sound effect
Keywords: bell, gliss, shimmer, shimmering, shine, shining, sparkle, sparkling, glitter, glittering

0:07
48 kHz
24 bit
Stereo

 
misc sounds

Title: Magic Chime 05

Magical chime sound effect
Keywords: magic wand, fairy dust, transition

0:09
48 kHz
24 bit
Stereo

 
misc sounds

Title: Magic Chime 06

Magical chime sound effect
Keywords:

0:05
48 kHz
24 bit
Stereo

 
misc sounds

Title: Magic Chime 07

Magical chime sound effect
Keywords:

0:06
48 kHz
24 bit
Stereo

              
Sours: https://www.soundjay.com/magic-sound-effect.html

Sound effects shimmering

Honest girlish heart, by all, all already right, just as it is, with my brains !. Immediately turning back to Hermione and again forgetting about everything. Their school friend's pants were half down; Harry's gaze froze for a moment on her satin, thin patterned red panties, dropped to her knees instead of pants.

Twinkle Sound Effects All Sounds

She spends two to three hours on this. Irishka knows it. She waited until Tamara left and rushed to me, hung on my neck, sprinkling hot kisses.

Similar news:

We started looking. Found. The toilet was open only for women.



457 458 459 460 461