Samsung ssd os migration

Samsung ssd os migration DEFAULT

How to Migrate Only Windows 10 OS to New SSD

"Hi. I just got a new SSD and have installed it into my PC. Now I am wondering how to move only my OS (Windows 10 Home) to the SSD so that I can boot from it. My current HDD is 1TB, while my SSD is GB. If anyone can give me a step-by-step guide, I would be grateful.

When we need to migrate an operating system or larger amounts of data, the first thing we think of is to clone the hard drive. However, in some cases, you may want or have to migrate only the OS to the new SSD, leaving the rest of the data on the original hard drive. For example, when the SSD is much smaller than your original hard drive, or when you want to use the new SSD as the system boot drive and the original drive as the data storage device. Whatever the reason, now, on this page, we will show you how to migrate only Windows 10 OS to a new SSD.


Way 1: Migrate only OS to SSD using Samsung Data Migration

If you’re using a Samsung SSD, then it comes with free data migration software that allows you to duplicate/clone OS and data stored on the original hard drive to your new Samsung SSD. Of course, you can choose to migrate only the OS to the SSD and keep the rest of the data on the original HDD. Follow these steps.

Step 1: Connect or install the new Samsung SSD to your computer and go to Disk Management to initialize it.

Step 2: Install the Samsung Data Migration on your Windows If the software is not attached to your SSD drive, just download it for free from Samsung’s official website.

Step 3: Start the Samsung Data Migration software and click on Start in the lower right corner of the screen.

click Start

Step 4: The software will automatically recognize the computer’s existing primary hard drive (i.e. the hard drive that contains your current operating system), and the newly connected Samsung SSD. They are displayed on the Source Disk panel and Target Disk panel, respectively. Select only your OS partition (C:) as the source disk. Usually, this is selected by default. Then click the Start button at the bottom of the screen to start cloning only the OS to the SSD.

start migrating OS

Step 5: Wait for the cloning process to complete. Once the cloning process is complete, you will receive a prompt on the screen.

Note: Samsung is the only company that provides data migration software for their SSD drives. And, Samsung Data Migration works only when the target drive is a Samsung SSD. So, if you are using another brand of SSD, such as Intel, Toshiba, etc., move on to another method.

Way 2: Migrate only Windows 10 OS to SSD using iSumsoft Cloner

iSumsoft Cloner is a powerful and yet easy-to-use Windows cloning software tool. It is designed with multiple cloning modes, including OS cloning, partition cloning, and disk cloning. The OS cloning mode allows you to clone/migrate only the OS to SSD while keeping other files and data on the original HDD. It supports all kinds of HDDs and SSDs, regardless of brand, shape and interface. Make sure you have connected or installed the new SSD to your computer, and then follow the steps below.

Step 1: Download and install iSumsoft Cloner on your Windows 10 computer. After installation, launch this tool.

Step 2: iSumsoft Cloner will automatically detect the computer’s existing hard drive the newly added SSD drive and display their status on the screen. Select the Copy option in the upper left corner of the screen.

select Copy

Step 3: Select the OS drive (usually drive C:) as the source disk and the SSD as the target disk. Keep the “Set the target partition as the boot disk” option is checked. This ensures you can successfully boot from the SSD after cloning.

select os drive and ssd

Step 4: Click on Start in the lower right corner to start cloning only the OS to the SSD. Then just wait for the cloning process to complete. Once the cloning process is complete, you will receive a success prompt on the interface.

start cloning os to ssd

Final Words

The above are two simple and effective methods you can use to migrate only the Windows 10 OS to a new SSD while keeping other data on the original HDD. No matter which method you use, the SSD is bootable because it contains an exact copy of your operating system. You can make your computer boot from the SSD if you want. Your Windows 10 OS will start and work normally on the SSD, just like it did on the original HDD. After Windows 10 has been running for a period of time without any problems, you can delete the operating system on the original hard drive to make room for other data.

Sours: https://www.isumsoft.com/windows/migrate-only-os-to-ssd.html

When we purchase a brand new Hard Disk Drive (HDD) or Solid State Drive (SSD) and want to replace with old drive, which is currently attached in the System. The first problem we face related to OS, The Operating System which is installed on the previous drive, can&#;t be moved to new drive easily. If we do simple copy paste command, then it won&#;t work. To do this task, we must have a professional software which is specially designed for OS migration from one drive to another drive. But mostly Utility softwares are paid, and you can&#;t move your existing OS from Older drive to newer drive without buying the Pro version.

But I was lucky, purchased a Samsung SSD EVO GB, only for handling OS. When I did search &#;How to Move System OS from HDD to SSD.&#; Found many results but most are for paid software, but I wanted the free one, and when I read the Installation Guide + Warranty Statement provided with the Samsung SSD, I got my problem solution.

Samsung Installation Guide and Warranty Statement

In the book they have mentioned about two Samsung Utilities: Samsung Migration and Samsung Magician. Samsung Magician is a Disk Management utility which can enhance the SSD performance, but what is Samsung Migration?

What is Samsung Migration?

Samsung Migration is data migration software that helps to move every file from older to a newer drive. It also can move OS to the new drive and make it bootable. So after moving OS to the new drive, it will work the same as older one because when you see the new drive, then all the data is already available on it.

Migrate all Data using Samsung Migration Software

If you are thinking to move existing installed OS from any Older HDD or SSD to Samsung SSD, then these steps will help you in full data cloning and OS Migration.

  • First Download the Samsung Data Migration Utility from Samsung Website. Go to Download Page Click here.
  • Once it gets the download, Install the software on old drive and Shutdown the system. After that connect the New Samsung SSD into the SATA Port and start the system.
  • When system restarts, run the Samsung Data Migration and you will see Samsung Data Migration Start Screen. Here, Click on the Start button.

Samsung Migration move existing os from older drive to new Samsung SSD

  • On next screen, It will automatically select the C Drive from source disk, and target disk is new Samsung SSD. Please note, I have not created any partition on Samsung SSD, and using the total GB disk for Operating System purpose. If you want to create the partition on the SSD, then first create then migrate. One another thing, always keep your Samsung SSD partition bigger than the source drive partition. Otherwise, the OS partition can&#;t be moved to the new drive. Once you select the correct disk partition from both Source and Target disk, Click on the Start button.

Samsung Migration move existing os from older HDD to new Samsung SSD 2

  • A warning message will be shown on the screen and tell you about the data on the target drive will be entirely erased if you do cloning on it. To accept the condition click on the YES button.

Samsung Migration move existing os from older HDD to new Samsung SSD 3

  • Now you&#;ll need to wait because it will take some time and it depends on the size of the data and drive speed. So wait until the data is not completely moved to new Samsung SSD.

Samsung Migration move existing os from older HDD to new Samsung SSD 4

  • When the data cloning completes, you will see the complete message: &#;The Data on the Source Disk has been successfully cloned to your Samsung SSD.&#;
  • Now, Shutdown the system and change the primary drive for booting, or you can also remove the older disk from the system if any problem is happening. When you think your new ssd is working properly and you don&#;t need the OS & data on the older drive, then you can format the drive and later can use that for storage purpose.

You May Also Like:

I hope the article will help you in migration and you will be able to clone your older OS & data partition to new Samsung SSD without paying anything.

Sours: https://www.pcmobitech.com/move-existing-os-from-hdd-to-a-samsung-ssd/
  1. Rx 580 destiny 2
  2. Epoxy floors albuquerque
  3. Forces of nature lyrics
  4. Samsung mute button
  5. Cairn quotes

How-to: Samsung Data Migration OS Only in Windows 10/8/7

Why do we need Samsung Data Migration OS only?

Samsung Data Migration (SDM) is a data migration tool that comes with Samsung SSDs like Samsung EVO. It helps user migrate operating system and data from the existing storage devices to the new Samsung SSD without reinstalling. Then, why would someone want to clone OS only?

Two common factors account for the phenomenon.

1. The purchased Samsung SSD doesn’t have enough space. Surely, shrinking partitions, deleting files, and uninstalling programs are helpful in cloning larger disks to smaller one. However, move OS only is more direct.

2. The older hard drive is good enough to be secondary storage. The arrangement usually happens in desktops or laptops that have two available disk bays. The combination makes full use of HDD’s and SSD’s advantages. Performance improved and storage saved, why not?

How to use Samsung Data Migration to clone OS only?

Here comes the brief guide of cloning C drive only to Samsung SSD. Connect or install the Samsung SSD and make sure it can be detected by Samsung Data Migration. If not, you may want to turn to Samsung SSD not detected in Windows 10 for more tips.

1. Install and launch Samsung Data Migration. Click Start in the lower-right corner to continue.

2. You’ll see the source disk, i.e. the existing disk which contains the operating system and the Samsung SSD. Pitch on C drive only. You’ll see only C drive on the Samsung SSD in virtual states. Click Start again to continue.

Select C Drive

3. A warning dialogue will pop out saying all data on the new Samsung SSD will be lost. Confirm the disk and click Yes to start the process. Wait for the process completes.

4. When you see “The data on the Source Disk has been successfully cloned to your Samsung SSD” in green font, the process completes perfectly. Shut down the PC and boot from the cloned Samsung SSD.

Cloning is complete

Tips: do not disconnect any of the disks during the cloning process. Make sure the power supply is sufficient for cloning.

It is quite simple and fast to perform Samsung Data Migration with boot drive only if everything works fine. In most cases, the process will complete as expected. Nevertheless, some users report the cloning failed. It reports the target disk has been disconnected and which is not true. In a few cases, you’ll get Samsung Data Migration stuck at 99 percent, 0 percent, or percent. All in all, finding a reliable workaround is necessary if you happen to face one of those troubles.

An easier way to migrate OS to Samsung SSD in Windows 10/8/7

AOMEI Partition Assistant Standard is free OS migration software that allows you to migrate just OS drive to Samsung SSD. It will automatically align partition for SSD during the system migration when it detects an SSD. The system drive and system-related drives are selected by default which avoids the boot failure caused by incomplete cloning. Supports Windows 10, 8, 7, XP, Vista.

1. Connect or install the Samsung SSD. Install and launch AOMEI Partition Assistant.

2. Click on Migrate OS to SSD in the left Wizards pane and read the preface information.

Migrate OS to SSD Samsung

3. As covered, the source system drive(s) is selected by default. Select the unallocated space on the Samsung SSD to store OS. If there is no unallocated space, selected partitions will be deleted after you check the option beneath.

Select Disk Space

4. Resize the system drive on Samsung SSD if you want to.

Resize Partition

5. Take a mental note of this information.

Note

6. View the virtual result. Click Apply and then Proceed to start the migration.

Apply

7. Shut down your PC after completion. You can either change the boot order in BIOS or replace an old hard drive with cloned SSD for the test.

Tips:
• Besides Samsung SSDs, AOMEI Partition Assistant also works its magic on other SSD brands such as PNY SSDs, Crucial SSDs, WD SSDs, Kingston SSDs, OCZ SSDs, etc.
• To migrate the system on/to GPT disk, please upgrade to AOMEI Partition Assistant Professional Edition.

Conclusion

It is not uncommon to do Samsung Data Migration with OS only to Samsung SSDs. The SDM provides a simple solution for its users. However, preparing a plan B is not a bad choice if that does not work.

AOMEI Partition Assistant also can assist you to change partition size flexibly and without formatting or deleting. For instance, you can extend a partition to a non-contiguous space without data loss.

Sours: https://www.diskpart.com/ssd-management/samsung-data-migration-os-onlyhtml
How to Migrate your data to a new Samsung SSD

Migrate Windows 10 to SSD Using Samsung Data Migration Software

So you just bought a Samsung SSD. Now what? How in the world you&#;re going to migrate your Windows 10 OS along with all your programs and files to the new SSD? While you could just bite the bullet and re-install everything from scratch, doing so can be extremely time consuming.

Luckily, one of the features that sets Samsung SSDs apart is the Samsung&#;s Data Migration Software which can make the migration process from your old HDD or SSD to your new one easy and pain free. Today we&#;ll show you how to use it.

Samsung Data Migration Software Guide

Step 1

Connect your new Samsung SSD to your PC. There are a few ways to do this.

  1. If you purchased a PCIe or mSATA drive, simply install the drive into your system and you should be good to go.
  2. If you purchased a inch SATA drive, you can either plug it into a second SATA port on your PC or connect it to your PC via a USB drive dock. An excellent USB drive dock is the Plugable USB Gen 2 SATA Drive Dock however, any USB drive dock can be used for this purpose.

Step 2

Download Samsung&#;s Data Migration Software. Once downloaded, extracted and installed, start up the software.

For the purposes of today&#;s guide, we&#;ll be showing you how to use the latest version of Samsung Data Migration Tool Version The Samsung Data Migration Software supports Windows XP SP2, Vista, 7, 8, , and 10 along with pretty much every Samsung Consumer SSD on the market.

Once started, you&#;ll be greeted with the screen below. Go ahead and click the Start button in the bottom right hand corner of the app to get started.

Migrate Windows 10 to SSD Using Samsung Data Migration Software 1

Step 3

Next you&#;ll see the Disk Analysis and Cloning menu. In our instance, we&#;re migrating from a small Kingston V GB to a Samsung EVO GB. We can see both drives below. Ensure that the drive you&#;re migrating from is under Source Disk and the new Samsung drive under Target Disk. Click on Start to begin the migration process.

Migrate Windows 10 to SSD Using Samsung Data Migration Software 2

Step 4

Once the process is started, simply wait until the migration process is completed.

Migrate Windows 10 to SSD Using Samsung Data Migration Software 3

Step 5

When the migration is complete, the utility will display &#;The data on the Source Disk has been successfully cloned to your Samsung SSD.&#; From here simply turn off your PC, disconnect the old SSD and connect the new SSD if you haven&#;t done so already. That&#;s it!

Migrate Windows 10 to SSD Using Samsung Data Migration Software 4
Sours: https://www.gearprimer.com/technology/migrate-windowssamsung-data-migration-software/

Ssd migration samsung os

Best Way to Transfer OS to Samsung SSD without Reinstalling

Quick Navigation:

Case: Can I just migrate OS to Samsung SSD?

My destination Samsung SSD is too small to clone

I want to install OS onto my new Samsung SSD drive. But when trying to clone my HDD (Seagate 2TB) to my new Samsung EVO GB SSD, it tells me that there is no enough space, Can I just clone OS to Samsung EVO SSD drive?

Why Transfer OS to Samsung SSD?

Solid state drive (SSD) becomes more and more popular in the past few years. Compared to traditional hard disk drive (HDD) , its convenience, rapid processing capacity and fast read & write speed makes it a better boot drive for many users.

Thus, if your computer has a long time to boot, or low response in daily use, SSD drive will be your best choice. Among the famous SSDs like Toshiba OCZ SSD, Samsung EVO SSD, SanDisk SSD, Seagate SSD, etc. Samsung SSD drives own a large number of users due to its excellent performance and good reputation.

The remaining question is, how to migrate OS to Samsung SSD and boot from it securely? System image backup and restore may be a feasible solution, but apparently not the easiest one. In the following article, I will show you how to clone OS to new SSD directly.

Best tool to migrate OS to Samsung SSD - AOMEI Backupper

To transfer OS to Samsung SSD drive, you could consider using the SSD clone software provided by Samsung, named Samsung Data Migration. It's specially designed for Samsung SSD products, including Samsung SSD Series, Series, Series, Series, Series, and Series. However, this software is not compatible with other manufacturers’ SSDs.

Besides, it only help users to transfer all the data from the old hard drive to Samsung SSD. If you only want to move OS to Samsung SSD, this tool may not be applicable, and you can try a more comprehensive data migration tool, AOMEI Backupper Professional.

This powerful software can help you clone hard drive to SSD, or clone only OS to SSD within a few clicks. It offers more flexible choices compared to Samsung Data Migration.

  • It can help you migrate only OS to Samsung SSD without reinstalling.

  • In addition to operating system, you can also clone selected partitions or entire disk.

  • By default, it copies only used sectors and allows you to clone larger HDD to smaller SSD.

  • It enables you to migrate data between GPT and MBR disks directly without any conversion.

  • It is available for Windows XP, Vista, 7, 8, 10 users and also applies to any manufacturer’s SSDs.

With AOMEI Backupper’s user-friendly GUI, you can complete the Samsung OS migration job without effort. What’s more, the Samsung migrate OS to SSD process will be running in the background and it won’t interrupt your operation with the PC. Keep reading and follow the detailed steps to clone OS to Samsung SSD.

How to Transfer OS to Samsung SSD without Reinstalling?

Before you start, connect the Samsung SSD drive to your PC, and download AOMEI Backupper to have a try (The Clone features in free trial can be demonstrated only, please upgrade to complete the cloning):

Step 1. Install and run AOMEI Backupper Professional, on the main window, choose Clone > System Clone in turn.

Choose System Clone

Step 2. Select the new Samsung SSD as the destination disk to save the OS from your hard drive. It will automatically select the system partition and system reserved partition.  Then click Next.

Choose Destination Partition

Partitioned SSD Warning

Step 3. Click Start Clone to clone OS to Samsung SSD drive. and make sure you have checked the SSD Alignment option which can improve the reading and writing speed as well as extend SSD’s lifespan.

System Clone Preview Align Checked

Note: If you select Sector by sector clone option, it will clone all sectors. Please make sure the destination disk is equal to or larger than the source disk.

Step 4. Click Finish when the Samsung OS migration process is done. Then enter into BIOS and set SSD as the first boot disk.

If you have a laptop with one card slot or have no USB-to-SATA cable, you can choose to backup your operating system to external hard drive, and create a bootable media, then swap out for the new Samsung SSD; boot your computer with your bootable media; run AOMEI Backupper Professional, then restore system to Samsung SSD drive.

Transfer hard drive including OS via Samsung Data Migration

In case you want to clone the entire hard drive to Samsung SSD with Samsung Data Migration, here are the steps to make it.

Step 1. Shut down your PC and connect your Samsung SSD with the USB-to-SATA cable.

Step 2. Start your PC. Install and run Samsung Data Migration. Click Start in the lower right corner.

Start

Step 3. Verify the source disk you want to move from and select the Samsung SSD as the target disk. The target disk will be overwritten, so please make sure you have chosen the right target disk.

Step 4. Click Start and hit Yes at the warning message. Wait for the cloning progress to be completed.

Step 5. Click quite to exit the software. Then turn off your PC and replace the original Samsung SSD with the new one and boot up from the new one.

Note: You may get stuck in Samsung Data Migration Software cloning failed situation, like "Target Disk has been disconnected" or other error codes. The probable reason may be the boot information or boot files are damaged. In addition, if there are more than two partitions on the existing hard drive, Samsung Data Migration will clone the first two partitions only. If you want to avoid annoying problems or want to clone multiple partitions to Samsung SSD, just pick AOMEI Backupper to help you make it.

Conclusion

To only transfer OS to Samsung SSD, AOMEI Backupper is a better choice compared to Samsung Data Migration. You just need 4 steps to finish Samsung OS migration job. Meanwhile, AOMEI Backupper is also a comprehensive PC backup tool that can backup all important data on your new SSD in the future. Rush into this tool and discover more!

Sours: https://www.ubackup.com/clone/transfer-os-to-samsung-ssdhtml
How To Clone Your Operating System Drive To A Samsung SSD Using Samsung's Migration Software

Best Way to Migrate Windows 10 to Samsung SSD without Reinstalling

How to move OS to Samsung SSD in Windows 10?

Can I move OS to SSD Samsung?

I have a problem, please help. I just purchased a Samsung EVO and I currently have a Toshiba hard drive in my Windows 10 computer, I never migrated OS to an SSD drive. So I was wondering the easiest way to move the OS to Samsung SSD, Thanks a lot.

- Question from tom’s hardware

According to the user’s situation, if the Samsung SSD is the following series, you could use the Samsung Data Migration Software that came with the SSD to migrate Windows 10 to Samsung SSD:

  • Samsung SSD PRO (EVO) Series

  • Samsung SSD PRO (EVO)

  • Samsung SSD PRO Series

  • Samsung SSD PRO (EVO) Series

  • Samsung SSD PRO (EVO) Series,  Series

  • Samsung SSD PRO (EVO) Series,  Series

  • Samsung SSD Series

  • Samsung SSD EVO Series

  • Samsung SSD Series

Migrate OS to Samsung SSD with Samsung Data Migration

Samsung Data Migration software is a data migration tool for Windows 10//8/7/Vista/XP. Here is the detailed steps to migrate OS from HDD to Samsung SSD with Samsung Data Migration software in Windows

Step 1. Open Samsung Data Migration, and connect your Samsung SSD, Choose the Windows 10 system disk as the source disk, you could choose up to 3 partitions on the HDD.

Samsung Data Migration Choose Destination Disk

Step 2. Select the Samsung SSD as the Target Disk.

Samsung Data Migration Start Clone

3. Click Start to clone HDD to Samsung SSD.

Then, the Samsung SSD migration process will start and finished after a while.

Samsung Data Migration Cloning Failed

However, you may get the Samsung Data Migration cloning failed error like the following:

  • Samsung Data Migration failed for unknown reason;

  • Samsung Data Migration cloning failed [ffffffff];

  • Samsung Data Migration stuck at 0%, 99%, %;

  • Even interrupted for unknown reason or not working.

  • Samsung Data Migration not detecting SSD

Besides, Samsung Data Migration only supports Samsung SSDs, and clone system disk only to Samsung SSD (data disk is not supported), If you choose other Samsung SSDs not in the list, you may need powerful Samsung Data Migration alternative.

Alternative to Samsung Data Migration in Windows 10/8/7 - AOMEI Backupper

As the hard drive cloning software, AOMEI Backupper Professional could be the best Samsung SSD clone software for Windows 10, , 8, 7, Vista, XP (bit and bit), which allows you migrate Windows 10 to Samsung SSD with simple clicks, no matter what the disk is system disk or data disk. It’s available for any brands of HDDs and SSDs.

It provides you two ways to execute Samsung SSD clone in Windows 10, namely, Disk Clone and System Clone. You can choose which way you want to use, depending on the items you want to clone, entire disk or only OS partition.

And it is capable of improving the performance of SSDs with SSD Alignment, clone all sectors of a hard drive with Sector by sector clone, edit partition size of destination disk to make full of unallocated space after cloning. 

It’s highly recommended by millions of users due to its reliable performance and powerful features. Please download the Samsung migration tool - AOMEI Backupper professional day free trial (Clone features in the free trial can only be demonstrated only, please upgrade to unlock). For server users, please try AOMEI Backupper Server.

Quick Guide to Migrate Windows 10 to Samsung SSD

Before migration, please connect the Samsung SSD with your computer and ensure the Samsung SSD can be detected, backup files and make the Samsung SSD empty because the the cloning process will delete everything on destination.

To make Samsung SSD clone Windows 10 easily, here is the detailed steps to migrate Windows 10 to Samsung SSD:

Step 1. Perform Samsung data migration tool - AOMEI Backupper, choose Clone > System Clone subsequently. 

Choose System Clone

Step 2. Select your Samsung SSD as the destination. Because all system partitions related to system files and boot files are selected by default. And click Next >>.

Choose Samsung SSD as Destination

Step 3. Tick SSD Alignment option to accelerate the writing and reading speed of the Samsung SSD, as well as prolong the lifespan. Then click Start Clone to migrate Windows 10 to Samsung SSD.

System Clone SSD Alignment Checked

Tips:
If you are cloning disk to larger Samsung SSD, you could choose the Sector By Sector Clone to clone all sectors on the source disk, no matter what it’s blank, used or bad sectors. Uncheck this option will skip the bad sectors if exist.
Beside cloning only system, this software also support cloning Windows 10 to new hard drive, clone HDD to Samsung SSD, clone hard drive to WD SSD, copy data from one SSD to another, etc.

Methods to boot from the cloned Samsung SSD: 

  • Method 1: After cloning, please press F2 or ESC key to enter BIOS and set the Samsung SSD as the first boot device. Then restart the computer to boot from the cloned Samsung SSD.
  • Method 2: If your computer has only one hard drive slot, just replace HDD with the Samsung SSD, and then boot from the Samsung SSD. That’s it.

The Epilogue

Migrating Windows 10 to Samsung SSD with best Samsung SSD clone software - AOMEI Backupper Professional is the best way to move Windows 10 installation to SSD without reinstalling. It not only moves OS to Samsung SSD easily in a few clicks, but also avoids Samsung Data Migration cloning failed error and applies to other brands of SSD. 

For IT professionals, you could try AOMEI Backupper Technician, which allows you to deploy system image to multiple computers within LAN. Thus, you don't need to configure all the computers one by one. Also, you can create portable version of this software with the technician edition of AOMEI Backupper, then you can run it directly off removable devices to clone or migrate Windows

Sours: https://www.ubackup.com/clone/migrate-windowsto-ssd-samsunghtml

You will also be interested:

Best Way to Move OS to New Samsung SSD without Reinstalling

Why Move OS to a New Samsung SSD?

With the increasing requirements for PC performance, SSDs have been widely produced by disk manufacturers, say Samsung Corp. Samsung has produced several high performing SSD drives: EVO, EVO, PRO, Series, Series, Series, and so on.

SSDs offer faster running speed than traditional hard drives HDDs due to no moving parts. Therefore, moving OS to a new Samsung SSD drive will greatly improve your PC experience. No matter use it as the replacement of the existing hard drive or the existing system drive, Samsung SSD does a great job. Using SSD for OS and HDD for storage can be counted as an effective arrangement.

What’s more, cloning OS to SSD saves time and effort because you don’t have to reinstall applications and reconfigure system settings. Actually, some programs are quite hard to reconfigure since it is connected with product keys or something like that. Well, how should you realize OS migration to Samsung SSD?

Samsung SSD

What Tool Should You Choose to Migrate Windows OS?

It is known that Samsung SSD usually provides dedicated data migration software named Samsung Data Migration (SDM). That software will clone old hard drive to new Samsung SSD without reinstalling Windows. That is to say, everything will be cloned to Samsung SSD. For user who wants to move OS only to Samsung SSD, that application won’t be much helpful.

In that case, it is worth trying with AOMEI Partition Assistant Professional which embeds more flexible choices. Specifically, to move OS drive only to SSD or copy entire hard drive to Samsung SSD depends on you. The following example will show you how to migrate OS to Samsung SSD.

Migrate OS to New Samsung SSD without Reinstalling

1. Shut down you PC, install Samsung SSD by plugging a SATA cable into the motherboard’s SATA controller, and connect the other end of the cable and a SATA power connector to the new SSD. You can use an external USB adapter as well.

2. Install and run AOMEI Partition Assistant Professional. Click Migrate OS to SSD in the left pane and read the preface in the next window.

Migrate OS to SSD

3. Select the Samsung SSD here as the target disk. Chech the option "I want to delete all partitions on this disk 2 to migrate system to the disk" if there is (are) partition(s).

Select Samsung SSD

4. Resize the system partition on the target disk Samsung SSD if you wish.

Resize Partition

5. Here is a Note that may be useful later.

Note

6. What you can see now is the virtual outcome of the above operations. Click Apply to make it real.

Apply

Samsung Data Migration Software Tutorial

In case you change your mind and want to clone old HDD to Samsung SSD with its Samsung Data Migration, this article also introduces how to migrate data with SDM briefly.

Samsung Data Migration

  1. Install the Samsung SSD as instructed before. Install and start Samsung Data Migration. Click Start in the lower right corner.

  2. Choose the source disk you want to move from. In general, that is your system disk.

  3. Choose the Samsung SSD as the target disk. Make sure you have chosen the right disk for the target disk will be overwritten.

  4. Wait for the cloning progress to be completed. The cloning time is affected by the amount of data on your hard drive.

Important:

During the data migrating, you may get errors like: “Cloning failed. Target disk has been disconnected” even if you know you did not remove the disk. Sometimes, you’ll find that Samsung Data Migration is stuck at 99%, %, or 0%. Or, Samsung EVO not detected in Windows There are also other unexpected troubles. Just make sure you do know how to deal with them.

Conclusion

AOMEI Partition Assistant is an effective tool to move OS to a new Samsung SSD. In fact, this tool can apply to other brands of SSD, like Crucial SSD, Kingston SSD, and SanDisk SSD. It is a Crucial SSD data transfer free kit. This partition manager is compatible with GPT disk and MBR disk, so you can transfer OS from GPT disk to SSD without reinstalling. AOMEI Partition Assistant could be used in Windows 8, , 10,11, 7, XP, and Windows Vista, so feel free to download it.

Sours: https://www.diskpart.com/articles/move-os-to-a-new-samsung-ssdhtml


467 468 469 470 471